top of page
AdobeStock_555799679_edited.jpg

J1939 CAN Bus Lighting Guide

J1939 CAN Bus Lighting Guide for Military Vehicles

SAE J1939 CAN bus gives vehicle controllers a way to manage lighting over the bus. Depending on the light and its configuration, a controller can select operating modes, adjust brightness, and read lighting status. This lets vehicle manufacturers integrate lighting into an existing control panel or display easily.
​
Blue Wolf offers two J1939 CAN bus lighting products for different installation needs. The BW-A700 Light Engine illuminates through side-emitting fiber along a path or around a panel. The BW-A480 Dome Light provides direct overhead or crew-station lighting and can support local control through its front keypad.
 

BW-A700 J1939 CAN Bus Light Engine        

Read the BW-A700 Integration Article Here

​

The BW-A700 drives Blue Wolf’s BW-A720-XX side-emitting fiber bundles. Use it where you want a continuous line of light along an interior walkway, around a panel, or across a crew compartment. The primary output supports RGB colors or white. The secondary output is available in NVIS White or NVG Green A.

 

A vehicle controller can select the operating mode and adjust the lighting output over J1939 CAN bus. The light engine has an IP68-rated enclosure and a six-pin D38999 connector.

​

​

​

BW-A480 Dual-Mode Dome Light with J1939 CAN Bus Option   

 Read the BW-A480 Integration Article Here

​

The BW-A480 provides direct overhead and crew-station lighting in a rugged, waterproof aluminum enclosure. It is available in single-color and dual-color optical configurations. In the dual-color configuration, the center provides bright white light and the side sections provide a selected color, such as NVIS White, NVG Green, red, or blue.

​

With the J1939 CAN bus option, the vehicle controller can manage lighting over the bus. The front keypad can be configured for full local control, power-only operation, or disabled. This gives vehicle designers control over which adjustments are available to the crew at the light itself, while maintaining master control.

​

​

Which light fits your application?

 

            

 

 

 

 

Planning your J1939 integration

Before finalizing your design, confirm the CAN bus speed, device addressing, and termination for your network. Use the technical documentation for your specific model to verify connector pinouts, supported J1939 CAN bus messages, and configuration settings.

​

Decide how the lights should behave at power-up and if communication is lost. If the installation uses a local keypad, decide which controls the crew should have and how the vehicle display should reflect adjustments made at the light.

 

Request technical information

Planning a new vehicle installation or upgrading an existing lighting system? Contact Blue Wolf for help selecting a light, configuring the optical outputs, and obtaining J1939 CAN Bus integration documentation for your application.

 

​

​

Choose…
BW-A700 with BW-A720-XX side-emitting fiber
BW-A480 with the J1939 CAN Bus option
BW-A700
BW-A480

If you need…                                                                                                    
A continuous line of light along a walkway or around a panel
Direct overhead light for a crew station or compartment
RGB accent lighting or white light through fiber
A fixture with a local keypad for crew control                                   

We have many products that are purchased through government agencies and a partial list of NAICS codes and vendor profile information can be found below.

 

We bring deep, functional expertise, with over 45+ years of combined experience in design engineering. We love what we do and we excel at bringing success to agencies, customers, and clients who utilize our products.

Blue Wolf Services
redorangeback.jpeg

NAICS Codes

​​

•    334418 - PCB Assembly
•    333314 - NVG Instrument and Lens Manufacturing
•    335110 - Electric Lamp Bulb and Part Manufacturing
•    335122 - Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing
•    335129 - Other Lighting Equipment Manufacturing
•    335931 - Lamp holder manufacturing
•    336320 - Vehicular Lighting Equipment Manufacturing
•    336413 - Other Aircraft Part and Auxiliary Equipment Manufacturing
•    541330 - Engineering Services
•    541490 - Other Specialized Design Services
•    335129 - Electric Lighting Equipment Manufacturing - (Underwater LED Lighting)

redorangeback.jpeg

Vendor Profile - Blue Wolf

  • DUNS # 026681220

  • Cage # 6PQC4

  • Active ORCA 

  • Small Business

  • PSC Codes: AS92, AE24, AE34, AR14, AZ14, C212, C215

Since 2007 we have distributors who have installed our LED lighting products in many of the following vehicles:
​
A109 NVG Cockpit, A119 NVG Cockpit, AS350 NVG Cockpit,  AS365 NVG Cockpit, AW139 NVG Cockpit,  B205 NVG Cockpit, B206 NVG Cockpit, B212 NVG, Cockpit, B214ST NVG Cockpit,   B222 NVG Cockpit,  B230 NVG Cockpit,  B407 NVG Cockpit, B412 NVG Cockpit, B430 NVG Cockpit, BK117 C-2 NVG Cockpit (EC145), BK117 NVG Cockpit,  BO105 NVG Cockpit,  Caravan C208 NVG Cockpit,  Casa 212 NVG Cockpit,  DHC-6 NVG Cockpit,  EC120 NVG Cockpit, EC130 NVG Cockpit, EC135 NVG Cockpit,  MD500 NVG Cockpit,  MD900 NVG Cockpit,  S-76 NVG Cockpit, OH-58 NVG Cockpit,  UH-1H NVG Cockpit,  AS355 NVG Cockpit,   AS555 NVG Cockpit, Dash-8 NVG Cockpit.
​
​

USA Flag

“Blue Wolf continues to be and invaluable partner in the conception and the design of some of our most important products. Bringing successful products to market is hard, painstaking work and it’s ultimately our customers that truly benefit, but working with Blue Wolf Makes getting there that much easier.”

Mark Todd - Sargent Cycle Products, President

All of Blue Wolf's products are made in the USA

Blue Wolf Products

MECHANICAL DESIGN

Our Engineering and consulting and services focus on our clients' most critical design issues and opportunities. We work on preliminary designs, help with prototyping and technology across all industries that require some form of Mechanical and Electrical assemblies or integration.

Blue Wolf Services

ELECTRICAL DESIGN

At Blue Wolf, we provide a broad range Product Engineering and Prototyping Services.  This includes Mechanical and Electrical Turn-Key design services. Our solutions are innovative and economical, while at the same time being based on industry knowledge and key manufacturing processes.

Blue Wolf Services

PAST PROJECTS

Blue Wolf is a full-service product development, Engineering, and Prototyping company based in beautiful Boise Idaho. By looking at some of our past projects it’s easy to see that most new designs incorporate various forms of mechanical, electrical, PCB Design, and firmware integration.

bottom of page